Filter By
Products List
-
Fingerstone Chisel 70mm
DKK1,150.00 Inc. TaxDKK1,000.00 Ex. TaxCatcheside Fingerstone Chisel Made by William Catcheside UK En9 Steel water quenched , and tempered quite high , tough, just hard enough to keep an edge. approx. Edge size is 70mm Picture is just a sample... -
JNS Japanese Apron
DKK287.50 Inc. TaxDKK250.00 Ex. TaxJapanese Made Denim Apron Made in Sanjo Niigata, and that what most of Blacksmiths use in Sanjo from a same maker Very simple Denim apron with large pocket on Front Total length 820mm Total width: 590mm -
Tuguo Abe Axe 1020g
DKK1,380.00 Inc. TaxDKK1,200.00 Ex. TaxFully Handmade and Hand-laminated Small axe from Tuguo Abe (1939) 83 years old Very old Blacksmith that is located in Nagaoka Yoita Working alone He do all by him self Making Axe and carving chisels His work is quite... -
Etudou Kiridashi 210 mm
DKK690.00 Inc. TaxDKK600.00 Ex. TaxKiridashi is usually used as tool to cut in wood or leather.But i find this fine and very precision blades to work super nice for other tasks in the kitchen too.They are super sharp as razors.This one is made from White 2 steel in Sanjo by Masuda... -
Japanese Hagi Yagi Kiln Tenryu 天龍 Plate
DKK782.00 Inc. TaxDKK680.00 Ex. TaxJapanese Hagi Yagi Kiln Tenryu 天龍 Plate Approx. measurements : Hagi Yagi type of Plate by Tenryu 天龍 Material: ceramics with glaze Height 40 mm x Diameter 317 mm Wight total:... -
Meuchi Eel Spike
DKK172.50 Inc. TaxDKK150.00 Ex. TaxSpike used to hold the fish (eel) when filleting them Can also be used to kill fish during ikizukuriMade in Japan Stainless steel measurements: Length: 150mm -
Shinzan Black 375 g Daruma
DKK690.00 Inc. TaxDKK600.00 Ex. TaxBlack finish round Daruma incl. Oak Handle 375g Hammer are made with a soft iron body with forge welded hard carbon steel faces 55HRC. This softer body acts as a shock absorber taking stress of hammering.Made by Makoto Aida in Sanjo... -
Japanese Small Axe Mizuno Echigo
DKK747.50 Inc. TaxDKK650.00 Ex. TaxJapanese Small Axe made by Mizuno Echigo from Sanjo Carbon steel laminated to a soft iron Oak Handle Total length: 365 mmcutting edge size: 110mmmax thickness: 25mm570g Made in Japan, Sanjo -
Iwasaki Kiridashi Sen 225 mm
DKK3,450.00 Inc. TaxDKK3,000.00 Ex. TaxThis Kiridashi made by Mizuochi-san that makes Iwasaki Kamisori I was fortunate enough to get these new stock signed and ready to be used Kiridashi Comes with Signed Wooden Box Sen... -
Iwasaki Kiridashi Me 210 mm
DKK3,335.00 Inc. TaxDKK2,900.00 Ex. TaxThis Kiridashi made by Mizuochi-san that makes Iwasaki Kamisori I was fortunate enough to get these new stock signed and ready to be used Kiridashi Comes with Signed Wooden Box... -
Sold Out
Fish Tweezers
DKK115.00 Inc. TaxDKK100.00 Ex. TaxI love to support Tsubame Sanjo products and what is made in Niigata So this is another thing that is made there :) Fish tweezers for removing bones Total length: 155mm Made in Niigata, Tsubame Japan -
- 11%- 11%
Kanayama Cordovan Strop 30000 Old Stock
DKK2,875.00 Inc. TaxDKK3,220.00 Inc. TaxDKK2,500.00 Ex. TaxDKK2,800.00 Ex. TaxUnfortunatly Kanayama died some time ago and this is last old stock I got from Last Japanese trip price is much higher then before but it is simply because they are not made anymore and I had to give much more for them to be able to buy them and... -
Japanese Shears
DKK345.00 Inc. TaxDKK300.00 Ex. TaxThis beautiful and super Sharp Pruning Shears is made in Sanjo, Niigata. by Hyoutangorou Made with high carbon steel and razor sharp edge out of the Box. You can also use the in them for poultry or other cutting needs in the... -
Iwasaki Kamisori 60mm
DKK3,335.00 Inc. TaxDKK2,900.00 Ex. TaxThe legendary blacksmith Mr. Shigeyoshi Iwasak was born in 1933 and was trained by among others his father Dr. Iwasaki Kousuke that designed Iwasaki Kamisori also a metallurgist famous for classifying Japanese steels i.e. "yellow paper", "white paper",... -
Iwasaki Kamisori 50mm
DKK2,277.00 Inc. TaxDKK1,980.00 Ex. TaxThe legendary blacksmith Mr. Shigeyoshi Iwasak was born in 1933 and was trained by among others his father Dr. Iwasaki Kousuke that designed Iwasaki Kamisori also a metallurgist famous for classifying Japanese steels i.e. "yellow paper", "white paper",... -
Kanenori Nata Hatchet 135 mm
DKK632.50 Inc. TaxDKK550.00 Ex. TaxKanenori Japanese Nata Hatchet 135 mm Carbon steel laminated to a soft iron Oak Handle Total length: 360 mmcutting edge size: 135mmthickness: 9mm -
Kanayama Cordovan Strop 80000 Old Stock
DKK6,900.00 Inc. TaxDKK6,000.00 Ex. TaxUnfortunatly Kanayama died some time ago and this is last old stock I got from Last Japanese trip price is much higher then before but it is simply because they are not made anymore and I had to give much more for them to be able to buy them and... -
Kanayama Cordovan Strop 50000 Old Stock
DKK5,520.00 Inc. TaxDKK4,800.00 Ex. TaxUnfortunatly Kanayama died some time ago and this is last old stock I got from Last Japanese trip price is much higher then before but it is simply because they are not made anymore and I had to give much more for them to be able to buy them and make... -
Iwasaki Kuri Kogatana 130 mm with Box
DKK3,450.00 Inc. TaxDKK3,000.00 Ex. TaxKuri Kogatana is usually used as tool to cut in wood or leather.But i find this fine and very precision blades to work super nice for other tasks in the kitchen too.They are super sharp as razors.This one is made from Sweden Steel in Sanjo by famous... -
Diawood Kitchen Scissors
DKK402.50 Inc. TaxDKK350.00 Ex. TaxProbably the best kitchen shears out there. They come apart for easy cleaning and sharpening. Theses scissors are great for cutting through crab shells, fish fins and chicken. The design of these scissors allow for more than cutting, they can open...