Filter By
Products List
-
Ikeda White 1 Honyaki Gyuto 240mm Tamamoku
DKK15,000.00 Inc. TaxDKK12,000.00 Ex. TaxHonyaki Gyuto made by Yoshikazu Ikeda from Sakai and sharpened by Ion ShinpeiThen Polished and etched by JNS, Spine and Choil is rounded and polished This one is water quenched white 1 steel with wavy Hamon line it is more visible in person As... -
JNS Wakui Bloomery Gyuto 240mm nr 4
DKK9,375.00 Inc. TaxDKK7,500.00 Ex. TaxForged and heat treated by Wakui then it is Sharpened and polished by JNS with vertical Japanese stones for extra even bevel, Nugui Finish Spine and choil is rounded and mirror polished , Kanji is on the Tang (JNS) and (Wakui... -
Tanaka Kokorozashi Kurouchi Petty 145mm
DKK1,875.00 Inc. TaxDKK1,500.00 Ex. TaxKokorozashi 志 Brand that is made in JNS workshop Sharpened on Japanese horizontal wheels finished with Natural stones Kokorozashi can be translated as: will, motivation, ambition, a sense of purpose, or personal missionWith this brand I... -
Yoshikazu Tanaka Kokorozashi Tamamoku Bunka 180mm nr 3
DKK5,625.00 Inc. TaxDKK4,500.00 Ex. TaxKokorozashi 志 and Tamamoku 杢目 the Pattern on cladding Brand that is made in JNS workshop Sharpened on Japanese horizontal wheels finished with Natural stones Kokorozashi can be translated as: will, motivation, ambition, a sense... -
Mizukihara Uchigumori Lv 3 (a3505)
DKK11,250.00 Inc. TaxDKK9,000.00 Ex. TaxFamous Uchigomori from Mizukihara just on the other side of Ohira mine and comes from same mounten With Lots of Range pattern and very light gray color Crazy good to use for Kasumi finish and polishing These are selected... -
Nakayama Maruka Maruichi Kamisori Lv 5+ (a3497)
DKK10,000.00 Inc. TaxDKK8,000.00 Ex. TaxSuper beautiful Old Stock Nakayama Maruka from Maruichi Very Hard and super smooth stone ! Without any toxic Lines or inclusions at all !Final finisher for Kamisori and Razors ! It is very difficult to find that hard and fine Nakayama and they... -
Nakayama Maruichi Asagi Kamisori Lv 5+ (a3496)
DKK10,000.00 Inc. TaxDKK8,000.00 Ex. TaxSuper beautiful Old Stock Nakayama Asagi Maruichi Very Hard and super smooth stone ! Without any toxic Lines or inclusions at all !Final finisher for Kamisori and Razors ! It is very difficult to find that hard and fine Nakayama and they... -
JNS Nakagawa Kiritsuke Gyuto 240mm Deep Etch nr 6
DKK5,000.00 Inc. TaxDKK4,000.00 Ex. TaxIt is forged by Nakagawa Satoshi from blue 1 and damascus cladding Special Sharpened and finished by JNS in our own workshop, Deep Etched top with Choil and spine rounded and polished, Bevel finished with Uchigumori It is finished with... -
JNS Wakui Kurouchi Nakiri 180mm nr 10
DKK2,500.00 Inc. TaxDKK2,000.00 Ex. TaxForged to shape By Toshihiro Wakui from Sanjo Niigata and send to JNS for Sharpening and Polishing with UchigumoriAmazing forging on this line with very good tapering both spine and to choil, make it crazy nice cutter So it was much easier to grind... -
Nakayama Maruichi Kiita Kamisori Lv 5 (a3488)
DKK9,375.00 Inc. TaxDKK7,500.00 Ex. TaxSuper beautiful Nakayama from Maruichi, Kiita with Some Asagi pattern as well Very Hard and super smooth stone ! Without any toxic Lines or inclusions at all !Final finisher for Kamisori and Razors ! It is very difficult to find that... -
Nakayama Maruka Kiita Lv 5 (a3487)
DKK17,500.00 Inc. TaxDKK14,000.00 Ex. TaxSuper rare Nakayama Maruka Kiita Very Hard and smooth stone ! Without any toxic Lines or inclusions !Final finisher for Kamisori, Razors, Very consistent colour through out the stone Can also be used on Knives tools and razors, as super... -
JNS Nakagawa Dama Kiritsuke Gyuto 240mm
DKK5,000.00 Inc. TaxDKK4,000.00 Ex. TaxIt is forged by Nakagawa Satoshi from blue 1 and damascus cladding Special Sharpened and finished by JNS in our own workshop, Choil and spine rounded and polished, finished with Uchigumori It is finished with Sanjo like finish parallel... -
Catcheside JNS colab Petty 210mm White 1
DKK7,500.00 Inc. TaxDKK6,000.00 Ex. TaxOne of the kind ! Forged by William Catcheside from Catchesidecutlery and sharpened and polished by JNS William do mostly forged geometry blades and do not do full ground blades so this one he did only for JNS to sharpen and polish so much more... -
Nakayama Mizu Asagi Lv 5+ (a3482)
DKK11,250.00 Inc. TaxDKK9,000.00 Ex. TaxSuper beautiful Nakayama Mizu AsagiVery Hard and super smooth stone ! Without any toxic Lines or inclusions at all !Final finisher for Kamisori and Razors ! Big Razor stone that will last for many many generations !It is very difficult to find... -
JNS Yoshikazu Tanaka Kokorozashi Nakiri 180mm nr 4
DKK4,375.00 Inc. TaxDKK3,500.00 Ex. TaxKokorozashi 志 Brand that is made in JNS workshop Sharpened on Japanese horizontal wheels finished with Natural stones Kokorozashi can be translated as: will, motivation, ambition, a sense of purpose, or personal mission With this brand I... -
JNS Wakui Kurouchi Bunka 180mm nr 13
DKK2,500.00 Inc. TaxDKK2,000.00 Ex. TaxForged to shape By Toshihiro Wakui from Sanjo Niigata and send to JNS for Sharpening and Polishing with Uchigumori Amazing forging on this line with very good tapering both spine and to choil, make it crazy nice cutter So it was much easier... -
Yoshikazu Tanaka Kokorozashi Tamamoku Nakiri 180mm nr2
DKK5,625.00 Inc. TaxDKK4,500.00 Ex. TaxKokorozashi 志 and Tamamoku 杢目 the Pattern on cladding Brand that is made in JNS workshop Sharpened on Japanese horizontal wheels finished with Natural stones Kokorozashi can be translated as: will, motivation, ambition, a sense... -
JNS Wakui Kurouchi Gyuto 210mm nr 9
DKK2,500.00 Inc. TaxDKK2,000.00 Ex. TaxForged to shape By Toshihiro Wakui from Sanjo Niigata and send to JNS for Sharpening and Polishing with Uchigumori Amazing forging on this line with very good tapering both spine and to choil, make it crazy nice cutter So it was much easier... -
Toyama Noborikoi Kasumi Nakiri Stainless Clad 210mm Ebony
DKK5,625.00 Inc. TaxDKK4,500.00 Ex. TaxAnother Great Blacksmith from Sanjo, NiigataNoborikoi Kanji on backside is made only for JNS With Better Fit and Finish rounded and polished spine and Choil and his best heat-tread and steel he loves to use most ! I simply ask the maker to make... -
Catcheside JNS colab Gyuto 230mm White 1
DKK10,000.00 Inc. TaxDKK8,000.00 Ex. TaxOne of the kind ! Forged by William Catcheside from Catchesidecutlery and sharpened and polished by JNS William do mostly forged geometry blades and do not do full ground blades so this one he did only for JNS to sharpen and polish so much more...